96
96
10. Construction Drawings
Common
19. Warranty
The scope of our product warranty is limited to our manufacturing range.
Warranty (period and contents)
Warranty
Period
The product warranty period is 18 months after delivery, 18 months after shipment of the product from the seller, or
12 months from product commissioning, whichever is first.
Warranty
Conditions
In the event that any problem or damage to the product arises during the “Warranty Period” from defects in the
product whenever the product is properly installed and combined with the buyer's equipment or machines,
maintained as specified in the maintenance manual, and properly operated under the conditions described in the
catalog or as otherwise agree on in writing between the seller and the buyer or its customers, the seller will provide,
at its sole discretion, appropriate repair or replacement of the product, without charge, at a designated facility, except
as stipulated in the “Warranty Exclusions” described below.
However, if the product is installed or integrated into the Buyer's equipment or machines, the seller does not
reimburse the following costs: removal or reinstallation of the product or other incidental costs related thereto, any
lost opportunity, any profit loss or other incidental or consequential losses or damage incurred by the buyer or its
customers.
Warranty
Exclusions
Notwithstanding the above warranty, the warranty as set forth herein does not apply to any problem or damage to
the product caused by:
1. Installation, connection, combination or integration of the product with or into the other equipment or machine
that is rendered by any person or entity other than the seller;
2. Insufficient maintenance or improper operation by the buyer or its customers, such that the product is not
maintained in accordance with the maintenance manual provided or designated by the seller;
3. Improper use or operation of the product by the buyer or its customers without informing the Seller, including,
without limitation, the buyer’s or its customers’ operation of the product not in conformity with the specifications
and use of lubricating oil that is not recommended by the seller;
4. Any problem or damage to any equipment or machine into or with which the Product is installed, connected or
combined, or on any specifications particular to the buyer or its customers;
5. Any changes, modifications, improvements or alterations to the product or those functions that are rendered on
the product by any person or entity other than the seller;
6. Any parts in the product that are supplied or designated by the buyer or its customers;
7. Earthquake, fire, flood, sea breeze, gas, thunder, acts of God or any other reasons beyond the control of the seller;
8. Normal wear and tear or deterioration of the product’s parts, such as bearings and oil seals; and
9. Any other problems with or damage to the product that are not attributable to the seller.
