Sumitomo Drive Technologies DeviceNet HF-520 Series, Руководство по установке

Страница: 11 / 38

11
3 Receiving
3 Receiving
Please perform the following tasks after receiving the PROFIBUS-DP Option:
• Inspect the PROFIBUS-DP Option for damage.
• Verify receipt of the correct model by checking the information on the nameplate (see
Figure 2 ).
• If you receive the wrong model or the PROFIBUS-DP Option does not function properly,
contact your supplier.
◆
Contents and Packaging
Table 1 Contents of Package
◆
Tool Requirements
Note: Tools required to prepare PROFIBUS cables for wiring are not listed in this manual.
Description: Option Unit Ground Cables Warning Labels
Installation
Manual
(This book)
_
Quantity:
1 4 1 1
A Phillips screwdriver (M3, M3.5 to M6
<1>
) metric or (#1, #2
<1>
) U.S. standard size is required to install the
PROFIBUS-DP Option.
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
MANUAL