Sumitomo Drive Technologies DeviceNet HF-520 Series, Руководство по установке

Страница: 30 / 38

7 PROFIBUS-DP Option Data and I/O Maps
30
18
MEMOBUS/Modbus Starting Register
Address
(Low Byte)
18
MEMOBUS/Modbus Starting Register
Address
(Low Byte)
19 MEMOBUS/Modbus Number of Data 19 MEMOBUS/Modbus Number of Data
20 MEMOBUS/Modbus Data 1 (High Byte) 20 MEMOBUS/Modbus Data 1 (High Byte)
21 MEMOBUS/Modbus Data 1 (Low Byte) 21 MEMOBUS/Modbus Data 1 (Low Byte)
22 MEMOBUS/Modbus Data 2 (High Byte) 22 MEMOBUS/Modbus Data 2 (High Byte)
23 MEMOBUS/Modbus Data 2 (Low Byte) 23 MEMOBUS/Modbus Data 2 (Low Byte)
24 MEMOBUS/Modbus Data 3 (High Byte) 24 MEMOBUS/Modbus Data 3 (High Byte)
25 MEMOBUS/Modbus Data 3 (Low Byte) 25 MEMOBUS/Modbus Data 3 (Low Byte)
26 MEMOBUS/Modbus Data 4 (High Byte) 26 MEMOBUS/Modbus Data 4 (High Byte)
27 MEMOBUS/Modbus Data 4 (Low Byte) 27 MEMOBUS/Modbus Data 4 (Low Byte)
28
Reserved
28
Reserved 29 29
30 30
31 Handshaking Register 31 Handshaking Register
<1> To select drive analog output channel for communications, set H4-01 (Multi-Function Analog Output Terminal
AM) to 000 (through-mode).
<2> Drive digital output ON/OFF during communications, set H2-01 (Terminal MA, MB and MC Function Selection
(relay)), H2-02 (Terminal P1 Function Selection (open-collector)), and H2-03 (Terminal P2 Function Selection
(open-collector)) to F (through-mode).
<3> Unit depends on the setting of o1-03 (Digital Operator Display Scaling). Input data is 0 when the drive is set for V/
f Control.
<4> Cannot be used when setting A1-02 (Control Method Selection) to 0 (V/f Control without PG).
<5> Data is displayed in units of 0.01 A.
Output (Master Device to Drive) Input (Drive to Master Device)
Byte Description Byte Description