Sumitomo Drive Technologies DeviceNet HF-520 Series, Руководство по установке

Страница: 6 / 38

1 Preface and Safety
6
◆
Terms
Note: Indicates a supplement or precaution that does not cause drive damage.
Inverter
HF-520 Technical Manual
Manual No. : DM2302E
This manual describes installation, wiring, operation procedures, functions,
troubleshooting, maintenance, and inspections to perform before operation.
To obtain instruction manuals for Sumitomo products access the site below:
http//www.shi.co.jp/ptc/
HF-520 Operating and Maintenance Manual
Manual No. : DM2301E
This guide is packaged together with the product. It contains basic information
required to install and wire the drive. This guide provides basic programming and
simple set-up and adjustment.
Drive: HF-520 Series
PROFIBUS-DP Option: HF-520 Series Option PROFIBUS-DP (SI-P3/V-H)
STOP
(Hz)
(Hz)
(A)
(V)
Freq Reference
FWD / REV Sel
Output Freq
Output Current
Selected Monitor
Monitor
Verify
SetUpGuide
Parameter Set
Auto-Tuning
HF-520
:
:
:
:
:
:
:
:
:
:
Risque de décharge
électrique.
Lire le manuel avant l'installation.
Attendre 5 minutes après la coupure de l'alimentation,
pour permettre la décharge des condensateurs.
Pour répondre aux exigences , s assurer que le
neutre soit relié à la terre, pour la série 400V.
Read manual before installing.
Wait 5 minutes for capacitor discharge after
disconnecting power supply.
To conform to requirements, make sure
to ground the supply neutral for 400V class.
Risk of electric shock.
WARNING
AVERTISSEMENT