Subaru Solterra 2023, Руководство по началу работы

Страница: 119 / 148

MEMORY HEIGHT (if equipped)
You can set where the Power Back Door stops when it opens. This is a great feature to
limit the upward travel of the back door to ensure you can reach it or to prevent the back
door from contacting a garage ceiling. The opening height can be set with the
Multi-information Display by using the meter control switches, or it can also be
conveniently set using the Power Back Door itself:
1 Open the back door using
the Power Back Door
Switch. Pause the back door
when it reaches the desired
height.
2 Press and hold the Power
Back Door Close Switch on
the inside edge of the back
door for approximately
2 seconds. A buzzer sounds
4 times to confirm the height
is set.
To change the height setting, cancel the memory height by pressing and holding the Power
Back Door Close switch on the inside edge of the back door for approximately 7 seconds.
You will hear 4 chirps and then 2 chirps from the vehicle confirming the canceled setting.
You can then re-set the memory height following the same procedure.
For more information, please refer to “Before driving” in your Owner’s Manual.
2
HOW TO APPENDIX
117