Subaru 2011 Tribeca, Руководство пользователя

Страница: 470 / 580

Black plate (317,1)
北 米
Model "A3160BE-C" EDITED: 2010/ 11/ 19
.
Always turn off the engine before
raising the flat tire off the ground
using the jack. Never swing or
push the vehicle supported with
the jack. The jack can come out
of the jacking point due to a jolt
and this can result in a severe
accident.
1. Park on a hard, level surface, when-
ever possible, then stop the engine.
2. Set the parking brake securely and
shift in the
“
P
”
(Park) position.
3. Turn on the hazard warning flasher
and have everyone get out of the vehicle.
4. Put wheel blocks at the front and rear
of the tire diagonally opposite the flat tire.
1) Jack handle
2) Jack
3) Spare tire
5. Take out the jack and jack handle.
The jack and jack handle are stored under
the floor of the cargo area.
6. Remove the spare tire.
Refer to
“
Spare tire
” F
9-2 for its location,
instructions and precautions.
Carefully read
“
Temporary spare tire
” F
9-
5 and strictly follow the instructions.
NOTE
Make sure the jack is well lubricated
before using it.
Chrome plated wheels
7. Insert the tip (wrapped in vinyl tape or
a cloth) of a flat-head screwdriver into the
slot between the wheel and cap. Use it to
remove the cap. (Only vehicle equipped
with chrome plated wheels)
In case of emergency
9-7
–
CONTINUED
–
9