Subaru 2011 Tribeca, Руководство пользователя

Страница: 394 / 580

Black plate (239,1)
北 米
Model "A3160BE-C" EDITED: 2010/ 11/ 19
your garage door opener may be pro-
tected by a rolling code feature. In this
case you need to perform additional steps.
Refer to
“
Programming rolling-code-pro-
tected garage door openers in the U.S.A.
”
F
6-19.
NOTE
Rolling-code-protected garage door
openers are manufactured after 1996.
See the instruction manual of your
garage opener for confirmation.
7. Reconnect the motor of your garage
door opener to the outlet.
8. Test your garage door opener by
pressing the programmed HomeLink
®
button.
&
Programming rolling-code-
protected garage door open-
ers in the U.S.A.
If your garage door opener has a rolling
code feature, program the HomeLink
®
Wireless Control System for it by following
steps 1 through 5 in
“
Garage door opener
programming in the U.S.A.
” F
6-18 above.
Then continue with the following steps.
NOTE
The assistance of a second person
may make the programming quicker
and easier.
1. Locate the training button on the
garage door opener motor head unit.
The exact location and color of the button
may vary by brand of garage door opener.
If it is difficult to locate the training button,
refer to your garage door opener
’
s instruc-
tion manual.
1) Training button
2. Press the training button on the
garage door opener motor head unit
(which activates the
“
training light
”
on the
unit). Proceed to step 3 within 30 seconds.
3. Inside the vehicle, firmly press and
release the HomeLink
®
button that was
programmed in the section above. Press
and release the button a second time to
complete the programming procedure.
NOTE
Some garage door openers may re-
quire you to do the above procedure a
third time to complete the program-
ming.
4. The garage door opener should now
recognize the HomeLink
®
Wireless Con-
Interior equipment
6-19
–
CONTINUED
–
6