Subaru 2011 Tribeca, Руководство пользователя

Страница: 433 / 580

Black plate (280,1)
北 米
Model "A3160BE-C" EDITED: 2010/ 11/ 19
7-32
Starting and operating
.
Depress the brake pedal.
.
Shift the select lever into the
“
N
”
position.
The cruise control set indicator light on the
combination meter turns off when the
cruise control is canceled.
To resume the cruise control after it has
been temporarily canceled and with vehi-
cle speed of approximately 20 mph (32
km/h) or more, push the control lever
upward in the
“
RES/ACC
”
direction to
return to the original cruising speed auto-
matically.
The cruise control set indicator light on the
combination meter will automatically illu-
minate at this time.
&
To turn off the cruise control
There are two ways to turn off the cruise
control:
.
Push the main switch again.
.
Turn the ignition switch to the
“
Acc
”
or
“
LOCK
”
position (but only when the
vehicle is completely stopped).
&
To change the cruising speed
!
To increase the speed (by control
lever)
Push the control lever upward in the
“
RES/
ACC
”
direction and hold it until the vehicle
reaches the desired speed. Then, release
the control lever. The vehicle speed at that
moment will be memorized and treated as
the new set speed.
When the difference between the actual
vehicle speed and the set speed is less
than 4 mph (6.8 km/h), the set speed can
be increased 1 mph (1.6 km/h) each time
by pressing the control lever upward in the
“
RES/ACC
”
direction quickly.
!
To increase the speed (by accel-
erator pedal)
1. Depress the accelerator pedal to
accelerate the vehicle to the desired
speed.
2. Push the control lever downward in the
“
SET/COAST
”
direction once. Now the
desired speed is set and the vehicle will
keep running at that speed without de-
pressing the accelerator pedal.
NOTE
If the difference between the actual
vehicle speed when the control lever
is pushed downward and the speed last
time you set is less than 4 mph (6.8
km/h), the vehicle speed will be low-
ered by 1 mph (1.6 km/h). This occurs
because the cruise control system unit
regards this lever operation as that
intended to decrease the vehicle
speed.