Subaru 2011 Tribeca, Руководство пользователя

Страница: 275 / 580

Black plate (118,1)
北 米
Model "A3160BE-C" EDITED: 2010/ 11/ 19
2-16
Keys and doors
Alarm system
The alarm system helps to protect your
vehicle and valuables from theft. The horn
sounds and the turn signal lights flash if
someone attempts to break into your
vehicle.
The system can be armed and disarmed
with the remote transmitter.
The system does not operate when the
key is inserted into the ignition switch.
Your vehicle
’
s alarm system has been set
for activation at the time of shipment from
the factory. You can set the system for
deactivation yourself or have it done by
your SUBARU dealer.
&
System operation
The alarm system will give the following
alarms when triggered.
.
The vehicle
’
s horn will sound for 30
seconds.
.
The turn signal lights will flash for 30
seconds.
If any of the doors or the rear gate remains
open after the 30-second period, the horn
will continue to sound for a maximum of 3
minutes. If any of the doors or the rear
gate is closed while the horn is sounding,
the horn will stop sounding with a delay of
up to 30 seconds.
The alarm is triggered by:
.
Opening any of the doors or the rear
gate
.
Physical impact to the vehicle, such as
forced entry (only vehicles with shock
sensors (dealer option))
NOTE
The alarm system can be set to trigger
the illumination of the following interior
lights.
.
Dome light (illuminates only when
the dome light switch is in the
“
DOOR
”
position)
.
Map lights
The notifications regarding the dome
light and the map lights are deactivated
as the factory setting. A SUBARU
dealer can activate the system. Contact
your SUBARU dealer for details.
&
Activating and deactivating
the alarm system
To change the setting of your vehicle
’
s
alarm system for activation or deactiva-
tion, do the following.
1. Disarm the alarm system. Refer to
“
Disarming the system
” F
2-18.
2. Sit in the driver
’
s seat and shut all
doors and the rear gate.
3. Turn the ignition switch to the
“
ON
”
position.
4. Hold down the UNLOCK side of the
driver
’
s power door locking switch, open
the driver
’
s door within the following 1
second, and wait 10 seconds without
releasing the switch. The setting will then
be changed as follows.
If the system was previously activated:
The odometer/trip meter screen displays
“
AL oF
”
and the horn sounds twice,
indicating that the system is now deacti-
vated.
If the system was previously deacti-
vated:
The odometer/trip meter screen displays
“
AL on
”
and the horn sounds once,
indicating that the system is now acti-
vated.
NOTE
You may have the above setting
change done by your SUBARU dealer.