Subaru 2011 Tribeca, Руководство пользователя

Страница: 276 / 580

Black plate (119,1)
北 米
Model "A3160BE-C" EDITED: 2010/ 11/ 19
&
If you have accidentally trig-
gered the alarm system
!
To stop the alarm
Do any of the following operations.
.
Press any button on the remote trans-
mitter.
.
Turn the ignition switch to the
“
ON
”
position.
&
Arming the system
!
To arm the system using remote
transmitter
1. Close all windows and the moonroof.
2. Remove the key from the ignition
switch.
3. Open the doors and get out of the
vehicle.
4. Make sure that the engine hood is
locked.
5. Close all doors and the rear gate.
: Press to Arm the system.
: Press to Disarm the system.
6. Briefly press the
“ ”
button (for less
than 2 seconds). All doors and the rear
gate will lock, an electronic chirp will
sound once, the turn signal lights will flash
once and the indicator lights will start
flashing rapidly. After rapid flashing for 30
seconds (standby time), the indicator
lights will then flash slowly (twice approxi-
mately every 2 seconds), indicating that
the system has been armed for surveil-
lance.
If any of the doors or the rear gate is not
fully closed, an electronic chirp sounds
five times, the turn signal lights flash five
times to alert you that the doors or the rear
gate are not properly closed. When you
close the door, the system will automati-
cally arm and doors will automatically lock.
!
To arm the system using power
door locking switches
1. Close all windows.
2. Remove the key from the ignition
switch.
3. Open the doors and get out of the
vehicle.
4. Make sure that the engine hood is
locked.
5. Close the doors and the rear gate but
leave only the driver
’
s door or the front
passenger
’
s door open.
Keys and doors
2-17
–
CONTINUED
–
2