Subaru 2011 Tribeca, Руководство пользователя

Страница: 431 / 580

Black plate (278,1)
北 米
Model "A3160BE-C" EDITED: 2010/ 11/ 19
7-30
Starting and operating
To release the parking brake, hold down
the brake pedal while depressing the
parking brake pedal and slowly releasing
it.
When the parking brake is set while the
engine is running, the brake system
warning light illuminates. After starting
the vehicle, be sure that the warning light
has turned off before the vehicle is driven.
Refer to
“
Brake system warning light
” F
3-
16.
&
Parking tips
When parking your vehicle, always set the
parking brake firmly and put the select
lever in the
“
P
”
(Park) position. Always set
the parking brake firmly when parking your
vehicle. Never rely on the transmission
alone to hold the vehicle.
When parking on a hill, always turn the
steering wheel. When the vehicle is
headed up the hill, the front wheels should
be turned away from the curb.
When facing downhill, the front wheels
should be turned into the curb.
Cruise control
Cruise control enables you to maintain a
constant vehicle speed without holding
your foot on the accelerator pedal and it is
operative when the vehicle speed is 25
mph (40 km/h) or more. Make sure the
main switch is turned
“
OFF
”
when the
cruise control is not in use to avoid
unintentionally setting the cruise control.
NOTE
If you move the cruise control lever or
press the main switch button while
turning the ignition switch
“
ON
”
, the
cruise control function is deactivated
and the cruise control indicator light
flashes. To reactivate the cruise control
function, turn the ignition switch back
to the
“
Acc
”
or
“
LOCK
”
position, and
then turn it again to the
“
ON
”
position.
WARNING
Do not use the cruise control under
any of the following conditions.
These may cause loss of vehicle
control.
.
driving up or down a steep grade
.
driving on slippery or winding
roads
.
driving in heavy traffic