Sturtevant Richmont Torq-Tronics 2 Скачать руководство пользователя страница 5

Страница: 5 / 39

Torq-Tronics 2

® /

Owners Manual

ted by the tool. Proper hearing conservation measures, including annual audiograms

and training in the use and fit of hearing protection devices may be necessary. For addi-

tional information on hearing protection, refer to CFR § 1910.95, Occupational Noise

Exposure, and American National Standards Institute, ANSI S12.6, Hearing Protectors.

Torq-Tronics 2® Digital Torque Testers

should be securely mounted and located

such that inadvertent movement will not

allow the unit to be dislodged, possibly

causing personal injury or damage to the

unit. Should the unit be dropped, it should

be checked by someone qualified in the

service of electronic instrumentation.

WARNING: Shock Hazard. Disconnect power to the unit before

attempting to service. Any internal adjustments should be car-

ried out only by skilled persons who are aware of the hazards of

dealing with live circuitry. The cabinet which houses the circuitry

provides protection against dust and falling dirt. This unit should

be used only indoors. Do not use in explosive atmospheres.
WARNING: Shock Hazard. Damaged cords or plugs are danger-

ous, and should be repaired or replaced as necessary.

CAUTION: Tripping Hazard. Electrical cords and tool cables

must be organized and located in such a manner as to reduce

the likelihood of the user and others from tripping or becoming

entangled in electrical cords and cables used with this product.

Route electrical cord so that it is not subject to chafing, crushing,

or severing.

Owners Manual

Torq-Tronics 2

Sturtevant Richmont

Direct: 1 847/455-8677

U.S. Toll-Free: 800/877-1347

www.srtorque.com

Torq-Tronics 2

/ Owners Manual

tion measures, including annual audiograms and training in the use and fit of hearing

protection devices may be necessary. For additional information on hearing protection,

refer to CFR § 1910.95, Occupational Noise Exposure, and American National Stan-

dards Institute, ANSI S12.6, Hearing Protectors.

Torq-Tronics 2® Digital Torque Testers should

be securely mounted and located such that

inadvertent movement will not allow the unit

to be dislodged, possibly causing personal

injury or damage to the unit. Should the unit

be dropped, it should be checked by someone

qualified in the service of electronic instru-

mentation.

WARNING: Shock Hazard. Disconnect power to the unit before

attempting to service. Any internal adjustments should be carried

out only by skilled persons who are aware of the hazards of dealing

with live circuitry. The cabinet which houses the circuitry provides

protection against dust and falling dirt. This unit should be used

only indoors. Do not use in explosive atmospheres.
WARNING: Shock Hazard. Damaged cords or plugs are dangerous,

and should be repaired or replaced as necessary.

CAUTION: Tripping Hazard. Electrical cords and tool cables must

be organized and located in such a manner as to reduce the likeli-

hood of the user and others from tripping or becoming entangled in

electrical cords and cables used with this product. Route electrical

cord so that it is not subject to chafing, crushing, or severing.

Owners Manual

Torq-Tronics 2

Sturtevant Richmont

Direct: 1 847/455-8677

U.S. Toll-Free: 800/877-1347

www.srtorque.com

Impact resistant eye protection

must be worn while operating

or working near any power tool.

WARNING

Personal hearing protection is

recommended when operating

or working near any power tool.

CAUTION

Spindle Rotation

Torque Reaction

Impact resistant eye protection

must be worn while operating

or working near any power tool.

WARNING

Personal hearing protection is

recommended when operating

or working near any power tool.

CAUTION

Spindle Rotation

Torque Reaction

Impact resistant eye protection

must be worn while operating

or working near any power tool.

WARNING

Personal hearing protection is

recommended when operating

or working near any power tool.

CAUTION

Spindle Rotation

Torque Reaction

11/15/2013 REV D. Document Page 5 of 39

Torq-Tronics 2

/ Owners Manual

tion measures, including annual audiograms and training in the use and fit of hearing

protection devices may be necessary. For additional information on hearing protection,

refer to CFR § 1910.95, Occupational Noise Exposure, and American National Stan-

dards Institute, ANSI S12.6, Hearing Protectors.

Torq-Tronics 2® Digital Torque Testers should

be securely mounted and located such that

inadvertent movement will not allow the unit

to be dislodged, possibly causing personal

injury or damage to the unit. Should the unit

be dropped, it should be checked by someone

qualified in the service of electronic instru-

mentation.

WARNING: Shock Hazard. Disconnect power to the unit before

attempting to service. Any internal adjustments should be carried

out only by skilled persons who are aware of the hazards of dealing

with live circuitry. The cabinet which houses the circuitry provides

protection against dust and falling dirt. This unit should be used

only indoors. Do not use in explosive atmospheres.
WARNING: Shock Hazard. Damaged cords or plugs are dangerous,

and should be repaired or replaced as necessary.

CAUTION: Tripping Hazard. Electrical cords and tool cables must

be organized and located in such a manner as to reduce the likeli-

hood of the user and others from tripping or becoming entangled in

electrical cords and cables used with this product. Route electrical

cord so that it is not subject to chafing, crushing, or severing.

Owners Manual

Torq-Tronics 2

Sturtevant Richmont

Direct: 1 847/455-8677

U.S. Toll-Free: 800/877-1347

www.srtorque.com

Impact resistant eye protection

must be worn while operating

or working near any power tool.

WARNING

Personal hearing protection is

recommended when operating

or working near any power tool.

CAUTION

Spindle Rotation

Torque Reaction

Impact resistant eye protection

must be worn while operating

or working near any power tool.

WARNING

Personal hearing protection is

recommended when operating

or working near any power tool.

CAUTION

Spindle Rotation

Torque Reaction

Impact resistant eye protection

must be worn while operating

or working near any power tool.

WARNING

Personal hearing protection is

recommended when operating

or working near any power tool.

CAUTION

Spindle Rotation

Torque Reaction

11/15/2013 REV D. Document Page 5 of 39

Torq-Tronics 2

/ Owners Manual

tion measures, including annual audiograms and training in the use and fit of hearing

protection devices may be necessary. For additional information on hearing protection,

refer to CFR § 1910.95, Occupational Noise Exposure, and American National Stan-

dards Institute, ANSI S12.6, Hearing Protectors.

Torq-Tronics 2® Digital Torque Testers should

be securely mounted and located such that

inadvertent movement will not allow the unit

to be dislodged, possibly causing personal

injury or damage to the unit. Should the unit

be dropped, it should be checked by someone

qualified in the service of electronic instru-

mentation.

WARNING: Shock Hazard. Disconnect power to the unit before

attempting to service. Any internal adjustments should be carried

out only by skilled persons who are aware of the hazards of dealing

with live circuitry. The cabinet which houses the circuitry provides

protection against dust and falling dirt. This unit should be used

only indoors. Do not use in explosive atmospheres.
WARNING: Shock Hazard. Damaged cords or plugs are dangerous,

and should be repaired or replaced as necessary.

CAUTION: Tripping Hazard. Electrical cords and tool cables must

be organized and located in such a manner as to reduce the likeli-

hood of the user and others from tripping or becoming entangled in

electrical cords and cables used with this product. Route electrical

cord so that it is not subject to chafing, crushing, or severing.

Owners Manual

Torq-Tronics 2

Sturtevant Richmont

Direct: 1 847/455-8677

U.S. Toll-Free: 800/877-1347

www.srtorque.com

Impact resistant eye protection

must be worn while operating

or working near any power tool.

WARNING

Personal hearing protection is

recommended when operating

or working near any power tool.

CAUTION

Spindle Rotation

Torque Reaction

Impact resistant eye protection

must be worn while operating

or working near any power tool.

WARNING

Personal hearing protection is

recommended when operating

or working near any power tool.

CAUTION

Spindle Rotation

Torque Reaction

Impact resistant eye protection

must be worn while operating

or working near any power tool.

WARNING

Personal hearing protection is

recommended when operating

or working near any power tool.

CAUTION

Spindle Rotation

Torque Reaction

11/15/2013 REV D. Document Page 5 of 39

11/16/201

REV

. Document Page 5 of 39

Содержание Torq-Tronics 2








































Результаты поиска

Содержание Torq-Tronics 2

Отзывы:

Похожие инструкции для Torq-Tronics 2

Бренды по названию

Популярные бренды

Sturtevant Richmont Torq-Tronics 2, Руководство пользователя

Результаты поиска

Содержание Torq-Tronics 2

Отзывы:

Похожие инструкции для Torq-Tronics 2

Бренды по названию

Популярные бренды