Sturtevant Richmont Programmable Torque Verifier FM II, Руководство пользователя

Страница: 32 / 37

Page 30
1. If the second click occurs so rapidly after the first click that signal processing is still occur-
ring, the result may be a TMAX rejection. The signal has been treated as one click that is
longer than the allowed maximum time. Example:
TMAX
2. If the signal arrives after signal processing but before the TBC timer starts, the result may
be that nothing occurs.
3. If the signal arrives after the TBC timer starts but during the specified waiting period, the
result will be a TBC display and a reject sound.
TBC
If a batch is completed and the first fastener of the next batch is tightened before the expiration
of the specified Time Between Batches, the error will be signaled with the display of the TBB
notice and a reject sound. Example:
TBB
Press the MODE keyswitch once and the batch size will be scrolled across the LED Display.
Example:
BATCH LIMIT / 3
Press the MODE keyswitch again and the total number of batches for that parameter will be
scrolled across the LED Display. Example:
BATCH TOTAL A. 6
Press the MODE keyswitch a third time and the current signal strength will be appear on the LED
Display. The scale is 00 to 99, with 00 meaning there is effectively no signal, and 99 equaling
the strongest possible signal. The display changes very quickly as the signal starts, the informa-
tion processed, and the signal ends. If you cannot determine the strength because of the rapidi-
ty of the number change, click the wrench and hold it in the “clicked” position. This feature can
be helpful in determing the placement of the unit for best reception. Example:
SIGNAL 84
Press the MODE keyswitch a fourth time and the current fastener count will be scrolled across
the LED Display and the unit returned to operating mode. Example:
COUNT A. 0
If it is necessary to check the torque setting on the FM Switch Wrench, simply push the SUS-
PEND keyswitch. The red Suspend LED will light continuously and signals from the wrench will
be ignored. To resume operation, simply press the SUSPEND keyswitch again.