Stryker CrossFlow, Руководство по обслуживанию

Страница: 29 / 48

EN-27
DRAFT
Navigating to the Help Menu
1� Press
to open the Help Menu on any screen�
System Feedback
Audible Feedback
Audible Feedback Event Implication
Three high-tone beeps Fault error Refer to “Error Messages”
Three high-tone beeps,
pause, two beeps Lockdown error Refer to “Error Messages”
One medium-tone
beep Accessory connection Refer to “Connect the Components” and “Insert
the Inflow/Outflow Cassette”
Two medium-tone
beeps Accessory removal Refer to “Connect the Components” and “Insert
the Inflow/Outflow Cassette”
One low-tone beep Touchscreen/Hand control/
Footswitch operation N/A
Three (medium, low,
high-tone) beeps Hot swap Refer to “Swap between Hardware Combination
Selections”
Error Messages
The words caution, fault, and lockdown carry special meanings and should be carefully reviewed:
•
Caution: Visual popup error is displayed for five seconds; user may clear the message when the problem
is resolved�
• Fault: The pump will stop; user may clear the message when the problem is resolved�
•
Lockdown:
The pump will stop; reboot system�
Error Message Cause Possible Solution
CAUTION Cassette about to expire (two hours left
before expiration)� • Replace the cassette�
CAUTION Preventative Maintenance required; the
unit has reached its recommended service
interval� • Contact your Stryker
representative�
CAUTION Inflow/Outflow RFID read failure: The
Inflow or Outflow RFID tag cannot be
detected while the pump is stopped� • Ensure the Inflow or Outflow
Cassette is fully inserted�
• If the problem persists, replace
the cassette�
• If the problem persists, contact
your Stryker representative�
FAULT Priming Error: No fluid in the tubing after
ten seconds� • Ensure the pinch clamps on the
saline bags are open�
• Ensure the Inflow Cassette is
fully inserted�