Stryker CrossFlow, Руководство по обслуживанию

Страница: 18 / 48

EN-16
DRAFT
Changing the User Preference File or Joint Selections
1� If the pump is running, press
to
stop the pump�
2� Press
in the lower left-hand corner of
the screen�
3� Press
to return to the user preference
file selection menu� Press
to return to
the Run Screen�
4� Follow the instructions in the “Select the User
Preference File” and “Select the Joint” section
to change the user preference file and/or
joint�
Changing the Hardware Combination Selections
Note:
Adjusting the settings will override the default and user preference file settings�
The system will select the following default hardware combination if “Standard Settings” is selected:
Hardware
option Joint Default combination
Knee Stryker 5�8 mm x 140 mm cannula with 4�0 mm scope
Shoulder Stryker 5�8 mm x 140 mm cannula with 4�0 mm scope
Hip Stryker 5�0 mm x 165 mm cannula (bridge) with 4�0 mm scope
Small Stryker 4�0 mm x 75 mm cannula with 2�7 mm scope
— None
Alternate hardware combination
selections Cannula diameter - scope diameter = x
Low Flow x ≤ 1
Medium Flow 1
>
x
≥
2
High Flow x
>
2
Note: If the user preference file does not specify a hardware combination, follow these instructions to
change a hardware combination�
1� If the pump is running, press
to
stop the pump�
2� Press the hardware combination selection to
return to the hardware combination selection
menu�