Stryker 650700000000, Руководство по эксплуатации и техническому обслуживанию

Страница: 42 / 76

• Do not use the siderails as a push/pull device or to steer the product.
Siderails (XPS option) attach to the cot and are always available for your use. The siderails (XPS option) adjust according
to patient size and lock into seven positions. The siderails also adjust to fit through standard doorways or elevators.
To raise the siderails, lift up on the siderail until locked into the desired position.
To lower the siderails, lift up to relieve the weight, then pull the red lever. Always lower the siderails when you transfer a
patient to or from the cot.
The XPS option is not a primary patient support surface. It includes a wider mattress and is intended to enhance patient
comfort.
E Exxtte en nd diin ng g o orr rre ettrra accttiin ng g tth he e rre ettrra acctta ab blle e h he ea ad d sse eccttiio on n
Extend the retractable head section before you load the cot into the vehicle patient compartment. Retract the retractable
head section to roll the cot in any direction on the load wheels for improved mobility and maneuverability, even in the lowest
position.
W WA AR RN NIIN NG G
• Always lock the head and foot sections into place before you operate the cot.
• Do not load the cot into a vehicle with the head section retracted when using a cot fastener. The cot may tip or not
connect with the cot fastener.
To extend or retract the retractable head section:
1. Grasp the outer rail with one hand for support and pull the head section release handle. Rotate the head section release
handle toward the head end of the cot to release the head section from the locked position.
2. While you hold the head section release handle in the released position, pull the head section away from the litter frame.
Extend or push the head section toward the litter frame to retract.
3. Release the head section release handle to lock the head section in either the extended or retracted position.
4. Pull the head section up and down to check that it is locked.
E Exxtte en nd diin ng g o orr rre ettrra accttiin ng g tth he e rre ettrra acctta ab blle e ffo oo ott sse eccttiio on n
W WA AR RN NIIN NG G -- Always lock the head and foot sections into place before you operate the cot.
To extend or retract the retractable foot section:
1. Grasp the outer rail with one hand for support and pull the foot section release lever.
2. While you hold the foot section release lever, pull the foot section away from the litter frame. Extend or push the foot
section toward the litter frame to retract.
3. Release the foot section release lever to lock the foot section in either the extended (Figure 17), mid (Figure 18), or
retracted position (Figure 19).
4. Pull the foot section up and down to check that it is locked.
EN 36 6507-009-001 Rev AB.3