Stryker 650700000000, Руководство по эксплуатации и техническому обслуживанию

Страница: 43 / 76

F Fiig gu urre e 1 17 7 –– E Exxtte en nd de ed d
F Fiig gu urre e 1 18 8 –– M Miid d F Fiig gu urre e 1 19 9 –– R Re ettrra acctte ed d
R Ra aiissiin ng g o orr llo ow we erriin ng g tth he e ffo oo ottrre esstt
You can adjust the footrest to elevate the patient’s legs.
To raise the footrest, lift the frame as high as possible. The support bracket automatically secures the frame when you
release the footrest.
To lower the footrest, lift the frame and lift up on the footrest release handle (B) until the frame releases the support bracket
(Figure 20). Lower the footrest until flat.
R Ra aiissiin ng g o orr llo ow we erriin ng g tth he e kkn ne ee e G Ga attcch h
To raise the knee Gatch:
1. Lift either of the red lifting loops (A) until the knee Gatch is in the highest position (Figure 20).
2. Lower the knee Gatch to secure the support bracket to the locking mechanism.
3. Check that the locking mechanism is secure before you release the red lifting loop.
To lower the knee Gatch, lift either of the red lifting loops (A) to relieve pressure on the locking mechanism. While you
hold the red lifting loop, push on the red footrest release handle (B) until the support bracket is released. Lower the knee
Gatch until flat.
To raise the knee Gatch in trend, lift the footrest frame (C) as high as possible until the frame locks into place. The
support bracket automatically connects when you release the frame.
To lower the knee Gatch in trend, lift the footrest frame (C). While you hold the frame, lift up on the red footrest release
handle (B) until the frame releases the support bracket. Lower the footrest until flat.
6507-009-001 Rev AB.3 37 EN