N
No
otte
e
•
You can load an unoccupied cot into a vehicle with one operator using the powered method.
•
For information about using your cot with P
Po
ow
we
err--L
LO
OA
AD
D, see the P
Po
ow
we
err--L
LO
OA
AD
D Operations Manual.
To load a cot into a vehicle with an antler style cot fastener:
1. Extend and lock the retractable head section.
2. Stow and latch the transport handle.
3. Place the cot in a loading position.
N
No
otte
e -- A loading position is any position where the load wheels meet the vehicle floor height.
4. Lift the vehicle bumper, if equipped, to the raised position.
5. Roll the cot to the open door of the vehicle patient compartment.
6. Push the cot forward until the load wheels are on the vehicle patient compartment floor and the cot safety bar passes
the vehicle safety hook.
7. Pull the cot back until the cot safety bar connects to the vehicle safety hook for maximum clearance to lift the base.
8. Check that the cot safety bar connects with the vehicle safety hook.
9. Load the cot.
N
No
otte
e -- Always use the powered method to load an unoccupied cot with one operator. Do not use the manual method to
load an unoccupied cot with one operator.
• Powered method - using the cot control switches:
With both operators at the foot end
(recommended method)
With one operator at the foot end
and one operator on the side
With one operator (when loading an
unoccupied cot)
a. Both operators: Grasp the cot
frame at the foot end.
b. Operator 1: Press and hold the
retract (-) button to retract the cot
undercarriage.
a. Operator 1: Grasp the cot frame
at the foot end and press and
hold the retract (-) button to
retract the cot undercarriage.
b. Operator 2: Grasp the cot outer
rail to stabilize the cot as the cot
undercarriage retracts.
Grasp the cot frame at the foot end
and press and hold the retract (-)
button to retract the cot
undercarriage.
• Manual method - using the manual back-up release handle:
a. Operator 1 (at the foot end):
i.
Grasp the cot frame at the foot end.
ii. Lift the foot end of the cot until you lift the weight off of the cot base.
iii. Squeeze and hold the manual back-up release handle.
b. Operator 2 (on the side):
i.
Grasp the cot outer rail to stabilize the cot as you retract the cot undercarriage.
ii. Raise the cot undercarriage to the highest height position.
10. Push the cot into the vehicle patient compartment. Check that the foot section does not protrude from the vehicle or hit
the door.
11. Make sure that the cot is locked into the cot fastener (not included) by firmly pulling side to side on the foot end of the
cot.
N
No
otte
e -- When you use the manual back-up release handle, do not lift the base rapidly or the movement may appear
sluggish. Lift with a slow, constant motion.
EN
32
6507-009-001 Rev AB.3
Содержание 650700000000
Страница 2: ......
Страница 6: ......
Страница 75: ......
Страница 76: ...Stryker Medical 3800 E Centre Avenue Portage MI 49002 USA 6507 009 001 Rev AB 3 WCR AD 16 2021 08 ...