Stryker 650700000000, Руководство по эксплуатации и техническому обслуживанию

Страница: 39 / 76

U Un nllo oa ad diin ng g tth he e cco ott ffrro om m a a vve eh hiicclle e
Always unload an occupied cot with a minimum of two trained operators. Operators must be able to lift the total weight of
the patient, cot, and any items on the cot.
W WA AR RN NIIN NG G
• Always support the load of the patient, cot, and accessories after the weight is off of the ground.
• Always use two operators when a cot is occupied.
• Always follow proper hand placement on hand grips. Keep all hands clear of the red safety bar pivots when you load,
unload, or change the cot height position.
• Always make sure that the cot safety bar connects with the vehicle safety hook before you remove the cot from the
vehicle patient compartment to avoid the risk of injury.
• Do not pull or lift on the cot safety bar when you unload the cot.
• Always make sure that the cot is locked in the cot fastener before you load and unload. Injury may occur if the cot is not
secure.
• Always try to load and unload the cot on level ground to reduce the risk of a cot tip or injury.
• Do not use the jog function to jog past the set cot load height after the cot safety bar connects with the vehicle safety
hook.
• Always operate the cot only when all persons are clear of the mechanisms. Entanglement in powered cot mechanisms
can cause serious injury.
• Always stow and latch the transport handle before you load, unload, or use the transport handle to lift the cot.
C CA AU UT TIIO ON N
• Always set the transport wheels safely on the ground when you unload the cot from the vehicle patient compartment to
avoid the risk of product damage.
• Always clear any obstacles that may interfere and cause injury to the operator or patient before operating the product.
One or two operators can lift from the foot end of the cot. The operator must be able to lift the cot high enough for the cot
legs to extend when the cot is unloaded.
N No otte e -- You can unload an unoccupied cot from a vehicle with one operator.
To unload the cot from a vehicle:
1. Lift the vehicle bumper, if equipped, to the raised position.
N No otte e -- The cot is equipped with bumper detection. An obstruction will stop the cot from moving even if you continue to
hold the extend button. Remove the obstruction and press the extend button again to continue unloading. You may
need to load the cot back into the vehicle to proceed.
2. Remove the cot from the cot fastener.
3. Unload the cot.
• Powered method - using the cot control switches:
6507-009-001 Rev AB.3 33 EN