Stryker 6390, Руководство по обслуживанию

Страница: 127 / 138

G Gu uiid da an ncce e a an nd d m ma an nu uffa accttu urre err’’ss d de ecclla arra attiio on n -- e elle eccttrro om ma ag gn ne ettiicc iim mm mu un niittyy
N No otte e 1 1:: At 80 MHz and 800 MHz, the higher frequency range applies.
N No otte e 2 2:: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects, and people.
N No otte e 3 3:: The ISM (industrial, scientific and medical) bands between 0.15 MHz and 80 MHz are 6.765 MHz to 6.795 MHz;
13.553 MHz to 13.567 MHz; 26.957 MHz to 27.283 MHz; and 40.66 MHz to 40.70 MHz. The amateur radio bands
between 0.15 MHz and 80 MHz are 1.8 MHz to 2.0 MHz, 3.5 MHz to 4.0 MHz, 5.3 MHz to 5.4 MHz, 7 MHz to 7.3 MHz,
10.1 MHz to 10.15 MHz, 14 MHz to 14.2 MHz, 18.07 MHz to 18.17 MHz, 21.0 MHz to 21.4 MHz, 24.89 MHz to 24.99
MHz, 28.0 MHz to 29.7 MHz and 50.0 MHz to 54.0 MHz.
N No otte e 4 4:: Evaluated for immunity to proximity fields from RF wireless communication equipment per IEC 60601-1-2: 2014
Table 9.
a Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile
radios, amateur radio, AM and FM radio broadcast, and TV broadcast cannot be predicted theoretically with accuracy. To
assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be
considered. If the measured field strength in the location in which P
Po ow we err--L LO OA AD D is used exceeds the applicable RF
compliance level above, the P Po ow we err--L LO OA AD D system should be observed to verify normal operation. If abnormal
performance is observed, additional measures may be necessary, such as reorienting or relocating P Po ow we err--L LO OA AD D.
b Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 20 V/m.
6390-309-002 Rev AB.0 121 EN