Stryker 6390, Руководство по обслуживанию

Страница: 69 / 138

P Prriim ma arryy cco oiill rre ep plla acce em me en ntt,, h he ea ad d e en nd d
T To oo ollss rre eq qu uiirre ed d::
• 5/32'' hex wrench
• (2) 1/8'' hex wrench
• 3/8'' hex driver
• T25 Torx driver
• Diagonal pliers
• Torque wrench (ft-lb) > 60 ft-lb
P Prro occe ed du urre e::
1. Remove the trolley. See Trolley removal (page 33).
2. Remove the transfer. See Transfer removal (page 33).
3. Using a 3/8'' hex driver, remove the four anchor mounting bolts that secure the anchor to the floor place.
4. Unplug the main power cable from the patient compartment to the anchor assembly at the head end.
5. Using a 5/32'' hex wrench, remove the four screws (A) (Figure 50).
6. Using two 1/8'' hex wrenches, remove the four flat head cap screws (B) that secure the anchor pawl assembly to the
anchor (Figure 50).
7. Pull the anchor pawl assembly toward the head end of the anchor to remove the anchor pawl assembly.
A
B
A
B
F Fiig gu urre e 5 50 0 –– R Re em mo ovve e tth he e a an ncch ho orr p pa aw wll a asssse em mb bllyy ffrro om m tth he e a an ncch ho orr
8. Unplug the power cables from the extension cable from the anchor.
9. Unplug the two coil wires from the inductive primary board.
10. Using diagonal pliers, cut the cable ties (D) that secure the coil wires to the wire management strap (Figure 51).
6390-309-002 Rev AB.0 63 EN