Stryker 2920, Руководство по эксплуатации

Страница: 15 / 42

www.stryker.com 2920-109-001 REV G 11
Installation
11. Carefully rotate the foot end control box and support surface into the flat position ( Figure 7 on page 11 ).
CAUTION
Always lower the foot end section gently to avoid the risk of damage to the control box.
Figure 7: Installation complete and ready to flip
12. Fasten all four of the retaining straps to secure the support surface to the bed frame ( Installation on page 9Figure 9
on page 11 ).
Figure 8: Strap locations
Figure 9: Fasten the retaining straps
13. Install the clip for the pendant standalone optional control in one of the two locations listed below ( Figure 10 on
page 11 ) and ( Figure 11 on page 12 ).
a. Siderails
Figure 10: Pendant on siderails
b. Footboard