Striper Seaswirl Series, Руководство пользователя

Страница: 67 / 148

5.7
Wire Color Wire Designation
Red Wires on positive (+) side of battery that go to fuses
or circuit breakers, to distribution panels and high-
draw equipment (engine starters), start ignition
switches, and to meters.
Yellow with Wire from starter switch to starter solenoid.
Red Stripe
Yellow Power lead to bilge blower from a fuse or switch.
Wire from generator or alternator field terminal to
voltage regulator field terminal.
Dark Gray Wire between navigation lights and fuse.
Sensor wire from tachometer sender to tachometer.
Brown Leads to bilge pump(s) from fuses or switches.
Purple Wire between ignition switch and coil.
Wire from ignition switch through distribution panel
to electrical instruments.
Dark Blue Wire from switches or fuses to instrument and cabin
lights
Light Blue Sensor wire from engine oil pressure sender to oil
pressure gauge. (The pressure sensor is likely to
have three wires: light blue wire from sender, black
negative wire to ground or return, and purple hot
wire from switch or fuse.)
Tan Sensor wire from water temperature sender to water
temperature gauge.
Pink Sensor wire from fuel tank level sender to fuel
gauge.
Green Bonding wires; normally do not carry current.
55095-Seaswirl-05_Electric 9/8/05 3:04 PM Page 5.7