Strautmann Sherpa 120, Руководство по эксплуатации

Страница: 140 / 209

Service and maintenance
140 Sherpa 120, 140 | 06.19
Daily
Maintenance work Performer see
Machine
– Check for visible defects
Operator
–
Machine
– Check all functions, including the engine function
Operator
–
Service brake and parking brake
– Check for proper functioning
Operator
–
Lighting system and horn (reversing signal)
– Check for proper
functioning
Operator
–
Milling drum
– Check for imbalance, the milling blades for good
fixture, wear, breakage and loss, especially the outer milling
blades.
Operator
► page 193
Fast-Cut cutting knives (optional extra)
– Check for proper contact
with the counter-cutters; remove silage residues from the space
between if necessary
Operator
► page 195
Cutting knives of mixing auger
– Check for good fixture, wear,
breakage and fodder piling up
Operator
► page 183
Elevator conveyor
– Check strippers for wear
Operator
–
Elevator conveyor
– Check tension and carry out a visual check for
damage (conveyor run, fissures, raised corners)
Operator
► page 192
Side discharge conveyor
– Check tension and carry out a visual
check for damage (conveyor run, fissures, raised corners)
Operator
► page 189
Rear-view camera
– Check for proper functioning
Operator
–
Outside mirrors
– Check for proper setting and damage
Operator
–
Liquid filling-up points
– Check for tightness
Operator
–
Chassis
– Check all screwed connections for firm seating
Qualified staff
► page 135
Hydraulic hose pipes and screwed connections
– Check for firm
seating and tightness
Qualified staff
► page 165
Milling drum gearbox
– Check oil level
Operator
► page 178
Mixer gearbox
– Check oil level
Operator
► page 180
Tyres
– Check tyre pressure and carry out a visual check for
defects and sufficient tread depth (minimum 2 mm)
Operator
► page 200
Engine
– Check oil level
Operator
► page 157
Hydraulic oil tank
– Check oil level
Operator
► page 167
Coolant compensating reservoir
– Check coolant level
Operator
► page 159
Air filter element
– Clean
Operator
► page 174
Cooling system for coolant, charge air and hydraulic oil
– Clean (in
case of difficult conditions even several times a day)
Operator
–