Strautmann Sherpa 120 Скачать руководство пользователя страница 132 | Manualshive

Страница: 132 / 209

Strautmann Sherpa 120 Скачать руководство пользователя страница 132

Service and maintenance

132

Sherpa 120, 140 | 06.19

9

Service and maintenance

9.1

Safety

As a basic principle, the following is applicable:
•

Carry out the specified service and maintenance work on
the machine in due time.

•

Observe the maintenance intervals for wearing parts.

•

Replace damaged or worn parts immediately.

•

Secure the machine against accidental starting and
rolling before carrying out service or maintenance work
and climbing onto the machine.

•

Wait for the machine to stop completely before entering
the hazardous area.

•

Existing mechanical, hydraulic, pneumatic and electrical
or electronic residual energies may cause accidental
machine movements.

Beware of possible residual energies. Warning signs
mark the components with residual energies.

•

Fix larger assemblies carefully to lifting equipment before
replacing them.

•

Secure the lifted machine or lifted machine parts against
accidental lowering before carrying out service and
maintenance work.

•

Risk to parts of the body of crushing, shearing, cuts,
burns, becoming entangled and drawn in due to powered
machine parts if protective devices are open or removed.

Always close open protective devices or mount
previously removed protective devices before powering
the machine.

It is not allowed to open protective devices
–  when the machine is powered.
–  as long as the engine is running.
–  when the ignition key is in the machine and the

engine can be started accidentally.

– when the machine has not been secured against

accidental rolling by means of its parking brake and
chocks.

•

Check screws and nuts for firm seating at regular
intervals (approx. every 50 service hours). Retighten
loosened screws and nuts.

•

Check loosened screwed connections for firm seating.

«
...
130
131
132
133
134
...
»

Содержание Sherpa 120


















































































































































































































Отзывы:

Нет отзывов