Service and maintenance
Sherpa 120, 140 | 06.19
183
9.23 Mixing auger
– Cutting knives
Blunt cutting knives require a higher mixing auger power.
Therefore, grind the cutting knives as required.
9.23.1 Check cutting knives
Operative staff:
•
Operator
Only an authorised workshop is allowed to carry out work
in the mixing container.
WARNING
Falling from the top edge of the mixing container
Risk of serious injuries or even death when falling into the
mixing container.
It is not allowed
•
to stay above the mixing container.
•
to bend over the mixing container.
•
to enter the mixing container from above.
1. Daily check the cutting knives from the service platform
or the ladder for visible defects.
2. Have damaged or worn cutting knives replaced in good
time.
3. Remove broken-off cutting knife particles from the mixing
container to avoid consequential damage.
Содержание Sherpa 120
Страница 2: ......
