Stratasys Eden350V, Руководство пользователя

Страница: 131 / 182

DOC-03050 Rev. A
6–25
Eden350V User Guide
5. When the following screen appears, open the cover.
Figure 6-29: Wiper Cleaning wizard during steps 6–10
6. Put on the cleaning gloves.
7. Using a generous amount of alcohol on the cleaning cloth, remove any
material remaining on the wiper and the surrounding area.
8. Remove any pieces of waste material collected in the purge unit.
9. Inspect the wiper.
If the wiper is scratched, torn or worn, or if you cannot clean it
completely, replace it.
a. Grasp it and pull it up and out of its bracket.
b. Insert the new wiper blade, making sure that it is straight and secured
well on both sides .
10. In the wizard screen (see figure 6 ‐ 29), confirm that the wiper blade is
clean, and click
Next
.
11. Remove all tools and cleaning materials from the printer, and close the
cover.
12. Confirm this in the wizard screen, and click Next .
Figure 6-30: Confirmation screen
13. Click
Done
to close the wizard.