Stratasys Eden350V, Руководство пользователя

Страница: 118 / 182

Operating & Maintaining the Eden350V 3D Printer
6–12
DOC-03050 Rev. A
5. From the drop ‐ down menu, choose the material you want to install,
and click
Next
.
Figure 6-10: Material Selection screen
6. In the Flushing Options screen, choose the appropriate cycle for the
Model material you want to install.
Figure 6-11: Flushing Options screen
•
Economy. During this cycle, which takes about 20 minutes, the
pump purges the Model material from the print block, then flushes
the system with the new material.
Since traces of the previous material may be present in the first
models printed with the new material, this cycle is usually
acceptable when replacing a light ‐ colored Model material with a
darker material (such as TangoBlack™ or VeroBlack™), or if the
exact color of the printed models is unimportant. In most cases,
models will have the mechanical properties of the new material
(except when switching between Vero and Tango materials).
•
High ‐ performance . During this cycle, which takes about 55 minutes,
the wizard cleans the feed tubes and print block more thoroughly,
compared to the Economy cycle, by flushing the system with more
material.
This cycle ensures that models will have both color and mechanical
properties of the new material. This is important when replacing a
dark ‐ colored material (such as VeroBlack or TangoBlack) with a
lighter ‐ colored material, and when switching between Vero and
Tango materials.