Stratasys Eden350V, Руководство пользователя

Страница: 127 / 182

DOC-03050 Rev. A
6–21
Eden350V User Guide
UV Lamp
Check
A heat ‐ sensitive label is fixed to the UV lamp covers as a warning against
overheating. Its center changes from white to black if the temperature of
the cover reaches 65°C (150°F). If this occurs, do not use the printer, and call
your service provider. As a precaution, it is recommended that you check
the label before and after printing.
Figure 6-22: Heat-sensitive label on UV lamp cover
Cleaning the
Print Heads
and the Roller
Periodic inspection and cleaning of the orifice plates on the bottom of the
print block ensures that the print nozzles are not clogged. A wizard guides
you through the procedure, and adjusts components of the printer to
enable you to perform it. This procedure takes about 20 minutes, and
should be done at the beginning of the work day or before a big printing
job.
To clean the print heads and the roller:
1. Prepare—
•
isopropanol (IPA—isopropyl alcohol) or ethanol (ethyl alcohol)
•
disposable cleaning gloves
•
a supplied cleaning cloth or equivalent
•
a mirror
2. Start the Head Cleaning wizard from the Options menu (see figure 6 ‐ 27
on page 24).
Normal
Overheating
problem
If the UV lamp continues to overheat, and the temperature around the lamp
reaches 90°C (194°F), a heat fuse cuts the power to the UV lamp and the
motion motors. In the unlikely event that this occurs, the printer cannot be
used until it is serviced by an authorized service engineer.