Storz TECHNO PACK SP 100, Инструкция по эксплуатации

Страница: 66 / 104

64
多点测量准备工作
1
提示： 随机附送的简要使用说明书中对各测量步骤
也有具体说明。
在实时界面中点击 ‘开始测量’ 键可将实时图像 “冻结” 并打
开测量操作界面。
用鼠标左键点击 ‘显示和激活多点模型’。
测量系统会建议用于定义数学模型的激光点，此时使用者可
更改用于定义数学模型的激光点以更改模型。
系统识别到的每一个有效的激光测量点均会被标记并运用在
数学模型的计算中。
如果某些测量点被系统忽略，则可以通过点击鼠标或通过点
击并绘制矩形来将其选中。未运用在计算中的测量点通过叉
号标记。
通过点击功能键 “OK” 来激活数学模型。然后就可以使用测
量功能。
18/01
5.7 Performing measurements
5 Operating instructions
5.7 执行测量
5 操作说明
Preparing Multipoint measurements
1 NOTE: The individual measurement steps are also
described in the supplied quick guide.
Actuation of the ’Start measurement’ function in the live
view ’freezes’ the live image and opens the user interface
for the measurement.
Left-click on ’Display and activation of the Multipoint
model’.
The measurement system suggests laser points for the
definition of a mathematical model, at which time the user
can modify the model.
Every valid laser measurement point recognized by the
system is marked and is included in the calculation of the
mathematical model.
If a particular point is to be ignored by the system, then
you can select it with a mouse click or by clicking and
drawing a rectangle. Points not included in the calculation
are marked with a cross.
The mathematical model is activated by actuating the ’OK’
function button. The measurement functions are available
afterwards.