Storch Airless SL 1200 S, Инструкция по эксплуатации

Страница: 160 / 196

160
15. Warranty
Warranty conditions:
A warranty period of twelve months from the date of purchase/date of invoice applies to our tools for commercial
customers. If we have granted an extended warranty period, this period will be noted separately in the operating manu-
al for the equipment in question.
Claims:
If you wish to claim under our warranty or guarantee, please return the complete device and your invoice to our logisti-
cs centre in Berka, postage paid, or send it to one of our authorised service centres.
Please contact the chargeable STORCH service hotline first: +49 (0)202 . 49 20 – 110.
Your rights under our warranty or guarantee:
Claims can only be accepted for material defects or manufacturing errors, and only assuming intended use of the appli-
ance. Wear parts are not covered by such claims. All claims shall become void in the event of installation of third party
components, improper handling and storage, as well as in the event of obvious disregard of the operating instructions.
Repairs:
All repairs have to be conducted on our premises or by an authorised STORCH service centre.
14. Nozzle table
STORCH A-Tip nozzle finder
Proces-
sable
materi-
als
Glazes, alkyd resin coatings,
acrylic lacquers
Primers,
pre-coats
Interior emulsions,
exterior emulsions,
glues for glass fibre wallpapers
Flame protection,
bitumen material,
light levellers
Other spray fillers
Spray
width
8 9 10 11 12 13 15 17 19 21 23 25 27 31 35 37 39 41 43 45
10 cm 208 209 210 211 212 213 217 219
15 cm 308 309 310 311 313 315 317 319 321
20 cm 409 410 411 412 413 415 417 419 421 423 425 431
25 cm 511 513 515 517 519 521 523 525 527 531 535
30 cm 619 621 623 625 627 631 635 637 639 641 643
35 cm 721 743 745
Replacing the nozzles in good time, saves cash:
– less material use
– less paint mist
– better spray pattern
It makes sense to check the nozzles after 200 l fluid
throughput!
Original instruction