Stinger HEIGH10
®
Installation & Integration Kit
for 2011-2018 Jeep
®
Wrangler JK
SRK-JK11H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
AAMP Global is not affiliated with FCA US LLC. Jeep® is a registered trademark of FCA US LLC. The terms
OEM, Jeep®, Wrangler®, and Gladiator® all terms are used strictly for identification purposes only. It is not
implied that any part listed is a product of, or approved by, Fiat Chrysler Automobiles.
Pacific Accessory Corporation
Page 6
Rev: V1
Date:102722
®
Section 2: In-Vehicle Harness Connections and Preparation (cont.)
Part Two: USB/HDMI Extension (
HDMI-USB-CBL V2
) (cont.)
Step 4
Step 5
Route the USB/HDMI cables up
to the radio opening, making sure
to route them behind the metal
bracket. Reconnect and reinstall
the climate control panel.
Install the optional USB cover and
feed the USB/HDMI cables through
the front of the panel. Secure with
the flanged nut and then lock with
the lock nut.
Step 1
Part Three: GPS Antenna
Step 1
Step 2
Step 3
Clean the indicated area above
the right side of the instrument
cluster.
From the HEIGH10 box, stick the
metal plate to the surface and
place the magnetic GPS antenna
on the plate.
Route the blue GPS connector
behind the metal bracket and into
the radio opening. Bundle and
secure the excess antenna cable
behind the instrument cluster.
The GPS antenna is required for proper operation of Apple CarPlay and Android Auto, in addition to the optional GPS card if
installed. The GPS antenna and mounting plate are included with the HEIGH10 accessories.
