Stinger HEIGH10
®
Installation & Integration Kit
for 2011-2018 Jeep
®
Wrangler JK
SRK-JK11H
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
AAMP Global is not affiliated with FCA US LLC. Jeep® is a registered trademark of FCA US LLC. The terms
OEM, Jeep®, Wrangler®, and Gladiator® all terms are used strictly for identification purposes only. It is not
implied that any part listed is a product of, or approved by, Fiat Chrysler Automobiles.
Pacific Accessory Corporation
Page 12
Rev: V1
Date:102722
®
Part One: In-Vehicle Harness and Cable Connections (cont.)
Section 4: Radio Unit Installation (cont.)
Step 5
Connect any additional
components (camera, amps,
SXM) and tuck excess cables,
wires and connectors to the
sides, not directly behind the
radio.
Step 4
Connect the 2-pin connector
coming from the CAN T-Harness
to the DATA CON connector
on the SRK-CH1A-HAR main
harness.
Part Two: Mounting the Radio Assembly
Step 3
Step 2
Step 1
With the two display cables routed
over the top of the radio module,
slide the assembly into place. Take
caution that no wiring gets pinched
between metal brackets.
If the vehicle does not have a
factory radio support bracket,
insert the included clip-on nut
onto the top bracket as shown.
The top support bracket on the
radio assembly needs to go over
the top of the factory radio support
bracket with the factory nut
centered in the bracket cut-out.
