Still RX60-35/600 Скачать руководство пользователя страница 45

Страница: 45 / 470

Safety

Basic principles for safe operation

Product-speciﬁc dangers of the 36.2-

kWh and 118.4-kWh lithium-ion battery

WARNING

Risk of burns due to hot surfaces!
The battery has an integrated brake

resistor that can heat up to over 100°C

during operation.
It can take several hours of cooling

down before a safe temperature is

reached.
– Do not touch the hot area (1).

WARNING

Risk of injury!
If the safety valve (2) trips, there is a risk of injury!
– Exit the area around the battery immediately,

retreating to a minimum distance of 5 m.

NOTE

The brake resistor (1) is installed differently

depending on the battery group. The build-up

of heat in the area around the brake resistor

is harmless. The safety valve (2) opens when

the battery is subjected to over pressure or it

catches ﬁre.

All lithium-ion batteries are essentially associ-

ated with the risk of a ﬁre starting, of the battery

exploding and of the battery causing chemical

burns.
When used as intended, no hazardous

substances escape from the closed tray and

contact with toxic substances will not occur.

There is a risk of contact only in the event of

incorrect use (mechanical, thermal, electrical)

that leads to activation of the safety valve (2)

or to the housing cracking. As a result, the

electrolyte ﬂuid may leak out, the electrode

material may react with humidity/water,

or battery discharge/a ﬁre/or an explosion

can occur, depending on the surrounding

circumstances.
Touching live components can lead to an

electric shock, which can have thermal or

paralysing effects. The latter can cause ven-

171533 EN - 02/2019 - 19

Содержание RX60-35/600























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-35/600

Отзывы:

Похожие инструкции для RX60-35/600

Бренды по названию

Популярные бренды

Still RX60-35/600, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-35/600

Отзывы:

Похожие инструкции для RX60-35/600

Бренды по названию

Популярные бренды