Still RX60-35/600 Скачать руководство пользователя страница 18

Страница: 18 / 470

Foreword

Your truck

Operation

A multi-lever, Fingertip, mini-lever and the

Joystick 4Plus are available as operating

devices for the hydraulic functions. These

operating devices enable precise operation

and smooth control of the lifting speed thanks

to directly controlled valves and proportional

valve technology.
For drive mode, the truck features either

single-pedal or dual-pedal operation. The

accelerator pedal is used to accelerate and

brake (electric brake) the truck. In emergency

situations or when carrying heavy loads, the

driver can also brake the truck using the

service brake by pressing the brake pedal.

In dual-pedal operation, the truck has one

pedal for the "Forwards" drive direction and

one pedal for the "Reverse" drive direction.

Acceleration and braking behaviour can be

individually selected from ﬁve different drive

programmes.
The display-operating unit monitors the truck

functions, including each individual cell in the

lithium-ion battery.

General

The truck described in these operating instruc-

tions corresponds to the applicable standards

and safety regulations.
If the truck is to be operated on public roads, it

must conform to the existing national regula-

tions for the country in which it is being used.

The driving permit must be obtained from the

appropriate ofﬁce.
The truck has been ﬁtted with state-of-the-

art technology. Following these operating

instructions will allow the truck to be handled

safely. By complying with the speciﬁcations in

these operating instructions, the functionality

and the approved features of the truck will be

retained.
Get to know the technology, understand it

and use it safely - these operating instructions

provide the necessary information and help to

avoid accidents and to keep the truck ready for

operation beyond the warranty period.

171533 EN - 02/2019 - 19

Содержание RX60-35/600























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-35/600

Отзывы:

Похожие инструкции для RX60-35/600

Бренды по названию

Популярные бренды

Still RX60-35/600, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-35/600

Отзывы:

Похожие инструкции для RX60-35/600

Бренды по названию

Популярные бренды