Still RX60-35/600 Скачать руководство пользователя страница 249

Страница: 249 / 470

Operation

Attachments

+ F

Joystick 4Plus

– To open the clamp locking mechanism,

press and hold the shift button "F"(3).

– While doing so, move the horizontal rocker

button (1) to the left.

– Keep the shift button "F" (3) pressed down

and move the horizontal rocker button (1)

back to the neutral position.

The LED (2) lights up.
– While holding down the shift button "F",

move the horizontal rocker button (1) to the

left again within 1 second.

The LED (2) lights up as long as the clamp

locking mechanism is released.

NOTE

The hydraulic function for opening the clamp

is available for one second after the clamp

locking mechanism is released. After one

second, the clamp locking mechanism is

automatically reactivated.

It is not necessary to release the clamp locking

mechanism in order to close the clamp.
– To close the clamp locking mechanism,

press and hold the shift button"F"(3).

– While doing so, move the horizontal rocker

button (1) to the right.

The clamp closes.

171533 EN - 02/2019 - 19

235

Содержание RX60-35/600























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-35/600

Отзывы:

Похожие инструкции для RX60-35/600

Бренды по названию

Популярные бренды

Still RX60-35/600, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-35/600

Отзывы:

Похожие инструкции для RX60-35/600

Бренды по названию

Популярные бренды