Still RX60-35/600, Оригинальное руководство пользователя

Страница: 225 / 470

Operation
4
Attachments
5060_003-040_V2
2
1
1
3
5060_003-041
Operating attachments using multi-
lever controls and the 5th function
NOTE
For technical reasons, clamping attachments
must not be controlled via the 5th function.
The attachments (variant) are controlled in
this version using operating levers (1) and (2).
On the operating lever (1) you can, with the
aid of switch (3), initiate a function changeover
so that this operating lever then controls the
"5th function".
NOTE
The "5th function" designation refers to the
fact that the four operating levers control
four functions, while the "5th function" can
be controlled by switching functions.
The central and bottom parts of the pictograms
on the operating levers always show the
function that is activated by that lever. The
top part of the pictogram shows that the
attachment is equipped with the "5th function".
This essentially involves the following:
– Move the operating lever forwards.
The attachment moves in the direction of
movement shown in the centre part of the
pictogram.
– Move the operating lever backwards.
The attachment moves in the direction of
movement shown in the lower part of the
pictogram.
– Actuate the switch
The additional function of the attachment is
activated and can be controlled as the "5th
function" with the operating lever.
NOTE
Please see the operating instructions of the
fitted attachment for the movements/actions
resulting from using this "5th function".
171533 EN - 02/2019 - 19 211