4
Operation
Lifting
1
2
6210_00
3
-027
Removal
– Select a pallet corresponding to the fork arm
size.
– Set down the pallet next to the fork carriage
on the side chosen for removal.
– Lift the fork carriage until the fork arms are
approx. 3 cm above the pallet.
– Apply the parking brake.
– Remove the switch key.
– Unscrew the locking screw (2) on the side
chosen for removal.
– Pull up the locking lever (1) and push the
fork arms onto the pallet one after the other.
Installation
– Make sure that the locking screw is un-
screwed on the side chosen for installation.
– Place the fork arms on a pallet next to
the fork carriage on the side chosen for
installation.
– Pull up the locking lever (1) and push the
fork arms onto the fork carriage one after
the other.
– Place the fork arms in the required position
and push down the locking lever. Ensure
that the locking lever snaps into place.
– Screw in and tighten the locking screw (2).
DANGER
There is a risk of fatal injury from a falling load or
fork!
– Tighten the locking screw each time a fork is
changed.
– Driving and moving loads without the locking
screw is prohibited.
NOTE
If the truck is equipped with the "load measu-
rement" comfort feature, a "zero adjustment of
the load measurement" must always be per-
formed after the fork arms have been chan-
172
171533 EN - 02/2019 - 19
Содержание RX60-35/600
