Still RX60-35/600 Скачать руководство пользователя страница 284

Страница: 284 / 470

Operation

Trailer operation

NOTE

To protect the lower coupling pin bush against

contamination, always keep the tow coupling

closed.

7321_003-066_V2

Coupling model RO*245

NOTE

Trailer coupling RO 245 is intended for a

tow-bar eye in accordance with DIN 74054

(bore diameter 40 mm) or DIN 8454 (bore

diameter 35 mm).

– Take measures to prevent the trailer from

rolling away, e.g. use wheel chocks.

– Adjust the tow bar eye of the tiller so that it is

at the centre of the towing jaws.

– Push the hand lever (5) upwards.
– The tow coupling is opened.

DANGER

People can become trapped between the truck and

trailer!
When hooking up, ensure that no one is between

the truck and trailer.

– Slowly move the truck back.

DANGER

If the coupling pin drops out during towing, the trailer

will work loose and can no longer be controlled.

There is a risk of accident!
A protruding safety handle means that the tow bar

eye has not been coupled correctly. The trailer

must not be towed in this condition.
– Make sure that the control pin does not protrude

from the control bush.

– Repeat the coupling process if necessary.

– Remove any items used to prevent the

trailer from rolling away.

– Tow the trailer.

270

171533 EN - 02/2019 - 19

Содержание RX60-35/600























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-35/600

Отзывы:

Похожие инструкции для RX60-35/600

Бренды по названию

Популярные бренды

Still RX60-35/600, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-35/600

Отзывы:

Похожие инструкции для RX60-35/600

Бренды по названию

Популярные бренды