Still RX60-35/600 Скачать руководство пользователя страница 61

Страница: 61 / 470

Safety

Residual risk

Danger to employees

According to the German Ordinance on Indus-

trial Safety and Health (BetrSichV) and labour

protection law (ArbSchG), the operating com-

pany must determine and assess hazards

during operation, and establish the labour

protection measures required for employ-

ees (BetrSichVO). The operating company

must therefore draw up appropriate operating

instructions (§ 6 ArbSchG) and make them

available to the driver. A responsible person

must be appointed.

NOTE

Please observe the deﬁnition of the following

responsible persons: "operating company"

and "driver".

The construction and equipment of the

truck correspond to the Machinery Directive

2006/42/EC and are therefore marked with

CE labelling. These elements are therefore

not included in the hazard assessment. At-

tachments possess their own CE labelling and

likewise are not included for that reason. The

operating company must, however, select the

type and equipment of the trucks so as to com-

ply with the local provisions for deployment.
The result must be documented (§ 6 Arb-

SchG). In the case of truck applications involv-

ing similar hazard situations, the results may

be summarised. This overview (see chapter

"Overview of hazards and countermeasures")

provides help on complying with this regula-

tion. The overview speciﬁes the main hazards

that are the most frequent cause of accidents

in the event of non-compliance. If other major

operational hazards are involved, they must

also be taken into consideration.
The conditions of use for trucks are broadly

similar in many plants, so the hazards can

be summarised in one overview. Observe

the information provided by the relevant

employers' liability insurance association on

this subject.

171533 EN - 02/2019 - 19

Содержание RX60-35/600























































































































































































































































































































































































































































































Результаты поиска

Содержание RX60-35/600

Отзывы:

Похожие инструкции для RX60-35/600

Бренды по названию

Популярные бренды

Still RX60-35/600, Оригинальное руководство пользователя

Результаты поиска

Содержание RX60-35/600

Отзывы:

Похожие инструкции для RX60-35/600

Бренды по названию

Популярные бренды