Still RX60-35/600, Оригинальное руководство пользователя

Страница: 229 / 470

Operation
4
Attachments
2
E
F
1 3
7312_003-113_V2
E F
Controlling attachments using
the double mini-lever and the 5th
function
NOTE
For technical reasons, clamping attachments
must not be controlled via the 5th function.
NOTE
The "lift mast" 360° lever (3) and the "attach-
ments" cross lever (2) control four hydraulic
functions. The designation "5th function" re-
fers to the fact that the 5th hydraulic function
can be controlled with the cross lever by swit-
ching the functions using the "5th function"
function key (1).
The pictograms on the "attachments" cross
lever (2) show the respective functions that
are activated by this lever.
This essentially involves the following:
– Actuate the "5th function" function key (1)
and move the "attachments" cross lever (2)
in the direction of arrow (E).
The attachment moves in accordance with the
pictogram in position (E).
– Actuate the "5th function" function key (1)
and move the "attachments" cross lever (2)
in the direction of arrow (F).
The attachment moves in accordance with the
pictogram in position (F).
NOTE
The pictograms are attached depending
on the pre-assembled attachment. If an
attachment with other functions is fitted, the
pictograms must be checked for the correct
representation and changed if necessary.
– Contact the authorised service centre if
required.
171533 EN - 02/2019 - 19 215