Still FXV 14 N Скачать руководство пользователя страница 95

Страница: 95 / 152

Starting the truck

NOTE

When starting the truck, the forks must be in

the lowered position.

If the forks are in the raised position when

starting the truck, the Dynamic Load Con-

trol icon (3) is highlighted.
A yellow triangle symbol (1) appears on the

display.
The display indicates that the forks (2) must

be lowered. The arrow points downwards.
The mandatory lowering of forks function ap-

plies only to the DLC 3.

During work

When using the truck, the forks must be low-

ered regularly.
If the forks remain in the raised position for

more than four hours:

–

A beep sounds

–

The Dynamic Load Control icon (3) appears

on the display

–

A yellow triangle symbol (1) appears on the

display.

–

On the display, the arrow (2) points down-

wards only.

–

The forks must be lowered immediately

If the operator does not lower the forks imme-

diately, the truck will only move at 4 km/h and

the lifting speed will be reduced.

CAUTION

The display screen no longer works.
Do not continue to operate the truck. Contact the Af-

ter-Sales Service Centre to change the display.



Use

Driving assistance system: Dynamic Load Control

11748011551 EN - 02/2021 - 09

Содержание FXV 14 N

























































































































































Результаты поиска

Содержание FXV 14 N

Отзывы:

Бренды по названию

Популярные бренды

Still FXV 14 N, Оригинальное руководство пользователя

Результаты поиска

Содержание FXV 14 N

Отзывы:

Бренды по названию

Популярные бренды