Still FXV 14 N Скачать руководство пользователя страница 79

Страница: 79 / 152

Lift control elements

WARNING

Risk of injury
The safety instructions must be strictly adhered to.
Do not touch or stand on moving parts (e.g. lifting de-

vice, pushing devices, work installations, load lifting

devices).

CAUTION

Risk of the load swinging and loss of stability
Do not drive with a load in the raised position with-

out load on the load arms. The high load must be

lowered as close as possible to the load in the low

position. The forklift operator must lower the forks

again before moving the truck.

The truck has two lift systems:

Main lift

Lifting the fork arms

–

Start the truck.

–

Push the fork lifting control (1) upwards (A).

The fork arms are raised.
Lowering the fork arms

–

Pull the fork lowering control (1) downwards

(B).

The fork arms are lowered.
When the lifting control (1) is released, the

forks stabilise at the required height.

NOTE

The speed of lifting and lowering movements

is determined by the degree to which the con-

trol (1) is moved. It automatically returns to

neutral position when it is released.

CAUTION

Lifting and lowering the forks
Always use this control (1) gently without jerking.



Use

Transporting loads

11748011551 EN - 02/2021 - 09

Содержание FXV 14 N

























































































































































Результаты поиска

Содержание FXV 14 N

Отзывы:

Похожие инструкции для FXV 14 N

Бренды по названию

Популярные бренды

Still FXV 14 N, Оригинальное руководство пользователя

Результаты поиска

Содержание FXV 14 N

Отзывы:

Похожие инструкции для FXV 14 N

Бренды по названию

Популярные бренды