manualshive.com logo in svg

Stihl SP 81, Инструкция по эксплуатации

Поделиться
Скачать
Stihl SP 81 Скачать руководство пользователя страница 5

4

English

SP 81

Only mount tools and accessories that 
are explicitly approved for this power 
tool model by STIHL or are technically 
identical. If you have any questions in 
this respect, consult a servicing dealer. 
To reduce the risk of accidents or 
damage to the machine, use only high 
quality tools and replacement parts.

STIHL recommends the use of STIHL 
original tools and accessories. The 
characteristics of these components are 
specifically designed to match your 
machine and meet your performance 
requirements.

Clothing and Equipment

Wear proper protective clothing and 
equipment.

Clothing must be sturdy 
and snug-fitting but allow 
freedom of movement, 
e.g. an overall and jacket 
combination, do not wear 
a coat.

Avoid scarves, neckties, jewellery or 
anything that could get caught on 
branches or brush or moving parts of the 
machine. Tie up and confine long hair 
(e.g. with a hair net, cap, hard hat, etc.)

Wear sturdy footwear with non-slip 
soles.

Wear a

 safety hard hat 

where there is a danger of 
head injuries from falling 
objects. To reduce the risk 
of injury to your eyes from 
swirled up or thrown 

objects, always wear a face shield 

and 

safety glasses

.

Warning! 

A face shield alone does not 

provide adequate eye protection.

Wear hearing protection, e.g. earplugs 
or ear muffs.

Wear 

heavy-duty 

gloves, 

preferably made 

of leather.

STIHL offers a comprehensive range of 
protective clothing and equipment.

Transporting the Unit

Always turn off the engine.

Carry the unit suspended from harness 
or by the drive tube. Avoid touching hot 
parts of the machine, especially the 
muffler and gear housing – you could 
suffer serious burns.

Transporting in a vehicle: Properly 
secure your unit to prevent turnover, fuel 
spillage and damage.

Fueling

Gasoline is an 
extremely flammable 
fuel. 

Keep clear of naked 

flames and fire. Do not 
spill any fuel – do not 
smoke.

Always 

shut off the engine

 before 

refueling.

Do not fuel a hot engine – fuel may spill 
and cause a fire.

Open the fuel cap carefully to allow any 
pressure build-up in the tank to release 
slowly and avoid fuel spillage.

Содержание SP 81







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды