manualshive.com logo in svg

Stihl SP 81, Инструкция по эксплуатации

Поделиться
Скачать
Stihl SP 81 Скачать руководство пользователя страница 10

9

SP 81

English

Maintenance and repairs

The machine must be serviced regularly. 
Do not attempt any maintenance or 
repair work not described in your 
Owner’s Manual. All other work should 
be carried out by a servicing dealer. 

STIHL recommends that maintenance 
and repair work be carried out only by 
authorized STIHL dealers. STIHL 
dealers receive regular training and are 
supplied with technical information.

Use only high-quality replacement parts, 
in order to avoid the risk of accidents or 
damage to the machine. Contact a 
dealer if in doubt.

STIHL recommends the use of genuine 
STIHL spare parts. Such parts have 
been optimized for the machine and the 
user's requirements.

Before starting any maintenance or 
repair work and before cleaning the 
machine, always 

 stop the engine and 

disconnect the spark plug boot 

 to 

avoid all 

 risk of injury 

 if the engine 

starts up inadvertently.  – Exception: 
adjustment of carburetor and idle speed.

Do not service or store the machine near 
a naked light – 

risk of fire

 due to the 

fuel.

Check fuel cap regularly for tightness.

Use only the spark plugs approved by 
STIHL – see Specifications.

Inspect ignition lead (insulation in good 
condition, secure connection).

To reduce the

 risk of fire 

due to ignition 

outside the cylinder, move the slide 
control / stop switch to  

STOP

 or 

0

 before 

turning the engine over on the starter 
with the spark plug boot removed or the 
spark plug unscrewed.

Check that the muffler is in perfect 
working condition.

Do not use the machine if the muffler is 
damaged or missing – 

risk of fire! – 

Hearing damage!

Do not touch the hot muffler – 

risk of 

burns!

The condition of the anti-vibration 
buffers influences the machine's 
vibrations – they must be examined 
regularly.

STIHL power tool attachments are 
available for converting the single 
purpose unit into other power tool 
combinations.

Approved Power Tool 

Attachments

Содержание SP 81







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды