Stihl BT 360, Инструкция по эксплуатации

Страница: 9 / 28

BT 360
English
7
To reduce the risk of fire and damage to
hearing, do not operate your machine if
the muffler is damaged or missing. –
Do not touch a hot muffler since burn
injury will result.
Mounting the Inner Sections
N
Position the two inner sections (1)
against the underside of the
gearbox. Make sure the off-center
hinge plates (2) are on the outboard
sides of the tubes.
N
Fit the clamps (3) and line up the
holes.
N
Insert the M10x75 hex head screws
(4) from below.
N
Fit the plain washers (5) and spring
washers (6).
N
Screw on the nuts (7) and tighten
them down firmly.
Preparing the Retainers
N
Fit two hex head screws (8) in each
of the retainers (9) – make sure the
retainer engages the groove in the
hex head screw.
Mounting the Handlebars
N
Mount the handlebars so that the
hole (arrow) in the handlebar (10) is
on the right – viewed from the
operator.
Assembling the Unit
2
2
441BA049 KN
6 1 3 4 5 7
441BA008 KN
8
9
9
8
8
10
441BA050 KN