Stihl BT 360, Инструкция по эксплуатации

Страница: 15 / 28

BT 360
English
13
When the engine begins to fire:
N
Push in the choke knob and
continue cranking.
As soon as the engine runs
N
Release the throttle lever
immediately – the engine will settle
down to idling speed.
Make sure the carburetor is correctly
adjusted. The drilling spingle must not
rotate when the engine is idling.
Your machine is now ready for
operation.
Shut off the engine
N
Move the stop switch (2) on the
powerhead to STOP.
N
Move the stop switch (3) on the
handlebar to 0.
Other Hints on Starting
At very low outside temperatures
N
Warm up the engine.
If the engine does not start
If you did not push in the choke knob
quickly enough after the engine began to
fire, the combustion chamber is flooded.
N
Move the stop switch on the
powerhead to STOP.
N
Move the stop switch on the
handlebar to 0.
N
Remove the spark plug – see
"Spark Plug".
N
Dry the spark plug.
N
Crank the engine several times with
the starter to clear the combustion
chamber.
N
Refit the spark plug – see "Spark
Plug".
N
Move the stop switch on the
powerhead away from STOP.
N
Move the stop switch on the
handlebar to
F
.
N
Push in the choke knob – even if the
engine is cold.
N
Now start the engine.
If fuel tank has been run completely dry
and then refueled
N
Pull the starter rope several times to
prime the fuel system.
441BA064 KN
2
441BA065 KN
3
441BA066 KN