Stihl BT 360, Инструкция по эксплуатации

Страница: 5 / 28

BT 360
English
3
Before drilling, make sure there are no
buried power cables or supply pipes in
the work area (e.g. for gas, water,
electricity):
–
Contact your local utility company
for information on cable and pipe
locations.
–
Where necessary, confirm actual
location with cable detectors and/or
by carefully dug trenches.
Only use drilling tools and accessories
that are explicity approved for this power
tool by STIHL or are technically
identical. If you have any questions in
this respect, consult a servicing dealer.
Use only high quality parts and
accessories in order to avoid the risk of
accidents and damage to the machine.
STIHL recommends the use of original
STIHL replacement parts. They are
specifically designed to match your
model and meet your performance
requirements.
Never attempt to modify your unit in any
way since this may increase the risk of
personal injury. STIHL excludes all
liability for personal injury and damage
to property caused while using
unauthorized attachments.
Do not use a pressure washer to clean
the power tool. The solid jet of water
may damage parts of the power tool.
Clothing and Equipment
Wear proper protective clothing and
equipment.
Avoid clothing that could get caught on
branches or brush or moving parts of the
machine. Do not wear a scarf, necktie or
jewelry.
Wear steel-toed safety boots with non-
slip soles.
Wear a safety hard hat where there is a
danger of head injuries from falling
objects.
STIHL offers a comprehensive range of
personal protective clothing and
equipment.
Transporting the Power Tool
Always turn off the engine.
The power tool should be carried by two
persons by the handle frame.
Remove the auger before transporting
the power tool long distances. Toreduce
the risk of burn injury, carry the unit by
the handle frame with hot parts of the
machine (e.g. gearbox, muffler) away
from your body.
Allow the unit to cool down before
transporting it by vehicle.
Transporting in a vehicle: Properly
secure your power tool to prevent
turnover, fuel spillage and damage.
Fueling
Always shut off the engine before
refueling.
Do not fuel a hot engine – fuel may spill
and cause a fire.
Open the fuel cap carefully to allow any
pressure build-up in the tank to release
slowly and avoid fuel spillage.
Fuel your power tool only in well-
ventilated areas. If you spill fuel, wipe
the machine immediately – if fuel gets on
your clothing, change immediately.
Clothing must be sturdy
but allow complete free -
dom of movement. Wear
snug-fitting clothing, an
overall and jacket combi
-
nation, do not wear a
work coat.
Tie up and confine long
hair (e.g. with a hair net,
cap, hard hat, etc.).
Wear safety glasses or
other suitable eye protec -
tion. Wear hearing
protection, e.g. earplugs
or ear muffs.
Wear heavy-duty work
gloves made of durable
material (e.g. leather).
Gasoline is an extremely
flammable fuel. Keep
clear of naked flames. Do
not spill any fuel – do not
smoke.
After fueling, tighten
down the screw-type fuel
cap as securely as
possible.