Stiga E 300 Li 20 A, Руководство оператора, Страница: 18 / 42

�1� TECHNICAL DATA E 300 Li 20 A E 340 Li 20 A E 380 Li 20 A
�2� Nominal power* W 350 550 550
�3� Max. motor operating speed * min -1 3700 3400 3400
�4� Power supply voltage MAX V / d.c. 20 40 40
�5� Power supply voltage NOMINAL V / d.c. 18 36 36
�6� Machine weight * kg 8,4 10,8 11
�7� Cutting width cm 30 34 38
�8� Cutting means code 181004474/0 181004475/0 181004476/0
�9�
�10�
Acoustic pressure level (max.)
Measurement uncertainty
dB(A)
dB(A)
72,9
3
76,1
3
77,4
3
�11�
�10�
Measured acoustic power level (max.)
Measurement uncertainty
dB(A)
dB(A)
80,3
0,99
85,6
0,83
89,1
1,28
�12� Guaranteed acoustic power level dB(A) 82 87 91
�13�
�10�
Vibration level (max.)
Measurement uncertainty
m/s
2
m/s 2
1,38
1,5
1,54
1,5
1,51
1,5
* Please refer to the data indicated on the machine’s identification label for the exact figure.
�14� ACCESSORIES AVAILABLE ON REQUEST
�16� Batteries, mod.
BT 20 Li 2.0 A
BT 20 Li 4.0 A **
2 x BT 20 Li 2.0 A
2 x BT 20 Li 4.0 A
2 x BT 20 Li 2.0 A
2 x BT 20 Li 4.0 A **
�17� Battery charger, mod.
CG 20 Li
CGD 20 Li
CGW 20 Li
CG 20 Li
CGD 20 Li
CGW 20 Li
CG 20 Li
CGD 20 Li
CGW 20 Li
** Recommended machine/battery application for optimal performance.
IMPORTANT Where 2 batteries have to be used, both must be present in the appropriate housing. If only
one battery is inserted, the machine does not work.
For best performance, it is recommended that the two batteries have the same capacity and are fully
charged.