STIEBEL ELTRON WPC 04, Эксплуатация и установка

Страница: 12 / 72

oPeration
menu structure
12 | WPC | WPC cool www.stiebel-eltron.com
5.3 proGramS menu
All set times for heating, DHW, holiday and party modes can be
adjusted here, in addition, the heat-up program can be started.
level 2 level 3 level 4
HEATING PROGRAM HEAT CIRCUIT 1
HEAT CIRCUIT 2
DHW PROGRAM
PARTY PROGRAM HOURS
HOLIDAY PROGRAM HOLS BEGINNING
HOLIDAYS ENDING
HEAT-UP PROGRAM ON / OFF LOW END TEMPERA-
TURE
TEMP. RISE PERIOD
MAXIMUM TEMPERA-
TURE
MAX TEMPERATURE
DURATION
RISE PER DAY
5.3.1 HeatinG proGram
In the menu item HEATING PROGRAM you can determine when
and how often the appliance heats to the set comfort values for
heating circuit 1 and heating circuit 2. At all other times, the appli-
ance heats to the set ECO value. You can adjust the set values under
menu item SETTINGS / HEATING / HEAT CIRCUIT 1 or HEAT CIR-
CUIT 2. Below is an explanation of how to define a time program.
First, select the days on which you want to enable the HEATING
function:
+
-
26
�0
4�
01
�0
30
1
Monday
Mon
MAIN MENU
PROGRAMS HEATING PROGRAM
HEAT cIRcUIT 1
You can set your heating system as follows:
- For each individual day of the week (Monday - Sunday)
- Monday to Friday (Mon - Fri)
- Saturday and Sunday (Sat - Sun)
- The whole week (Mon - Sun)
Monday is initially offered.
f f Turn the scroll wheel to select another day or group of days.
f f
Confirm your selection with OK.
You can now set three switching time pairs. The three switching
time pairs are shown on the display, to the right of the clock. A
switching time pair comprises the start time and end point, at
which the appliance returns to its previous state.
07:00 - 20:00
- -:- - - - -:- -
- -:- - - - -:- -
26
�0
4�
01
�0
29
9
MONDAY
MAIN MENU
PROGRAMS HEATING PROGRAM
HEAT cIRcUIT 1
In this example, only one switching time pair has so far been
programmed. For switching time pairs 2 and 3, short dashes are
displayed instead of times. These switching time pairs are still
empty. Select one of the free switching time pairs with OK to reach
the level where you can set the associated start and end time.
Pressing OK brings up the display shown below. Set the required
time with the scroll wheel.
End
- -:- -
- -:- -
H H
Start
26
�0
4�
01
�0
30
2
MAIN MENU
PROGRAMS
HEATING PROGRAM
HEAT cIRcUIT 1
Times can be entered in intervals of 15 minutes. You can set 16:30
or 16:45 h, but not 16:37 h. Confirm your entry with OK.
periods around midnight
Assume, for example, you want heating mode to be enabled from
22:00 h for four hours every Wednesday evening. This means the
period does not expire until the next day, Thursday, at 02:00 h.
Since the day ends at 00:00, two switching time pairs are necessary
for the required program. First, program the period 22:00 to 00:00
h for Wednesday, then 00:00 to 02:00 h for Thursday.
5.3.2 dHW proGram
In the menu item DHW PROGRAM you can determine the times
during which DHW heating with the set comfort value should take
place. At all other times, DHW is heated to the set ECO value. You
can select the set values under menu item SETTINGS/DHW/DHW
TEMPERATURES.
You can set your DHW heating as follows:
- For each individual day of the week (Monday - Sunday)
- Monday to Friday (Mon - Fri)
- Saturday and Sunday (Sat - Sun)
- The whole week (Mon - Sun)
You can set three switching time pairs for each of these options.
Exception: If you want to heat DHW from 22:00 h until 06:00 h the
following day you will need two switching time pairs.
Example :